INDOOR AIR & REAL ESTATE
Radon questions for South Jersey home buyers and sellers
Radon cannot be seen, smelled or tasted, and a map cannot tell you the level in a particular home. A properly conducted test is the way to replace assumptions with property-specific information.
NJDEP recommends testing every home because radon levels can vary widely even within the same neighborhood. That makes radon a useful property-level question in Burlington, Ocean, Atlantic, Camden and Gloucester counties—not a reason to label an entire town or county. Use this guide to organize the transaction; rely on NJDEP-certified testing and mitigation professionals for the technical work.
1. Plan the test instead of relying on the map
NJDEP's municipal radon-potential report classifies areas by potential, but NJDEP also explains that homes in low- or moderate-potential areas can still have elevated results. Use the map as background information, not as a substitute for a test at the address you are considering.
Agree on the testing window, access and responsibility early enough to fit the contract schedule. Ask which level will be tested, what device will be used, how long the measurement will run and when the written report should be available. Direct technical questions to the certified testing business before the test begins.
2. Use the right tester for a real-estate transaction
NJDEP says only state-certified companies may test for or mitigate radon, except when homeowners test or mitigate their own homes. If a buyer under contract orders a test, NJDEP's testing guidance says a certified radon professional must handle the complete test because the buyer does not yet own the home.
Verify both the business and the individual through NJDEP's certification resources. Ask for the certification numbers, the test method and the written protocol. A general home inspection and a radon measurement are different services even when coordinated during the same inspection period.
3. Protect the testing conditions
Short-term radon tests require controlled conditions. NJDEP describes “closed-house” conditions as keeping windows and exterior doors closed except for normal entry and exit. For a test lasting less than four days, those conditions begin at least 12 hours before the test. Heating or cooling can operate normally, but whole-house fans and other equipment that bring outside air into the home may affect the test.
Do not move, cover, open or mail the device unless the certified tester's protocol specifically assigns that step to the homeowner who ordered a homeowner test. Buyers, sellers and real estate professionals should avoid interfering with the device or conditions. If a door was left open, a device moved or another unusual event occurred, disclose it to the tester and let the professional decide whether the result remains valid.
4. Read the report before deciding what comes next
Review the measured level, device, dates, tested location and any notation about conditions. NJDEP and the U.S. Environmental Protection Agency recommend mitigation when a home tests at 4 picocuries per liter (pCi/L) or higher. Discuss the particular result with the certified tester and your attorney rather than converting a general threshold into a contract conclusion on your own.
If mitigation is considered, obtain a written proposal from an NJDEP-certified mitigation business. Ask where the pipe, fan, discharge point and system indicator would be located, what electrical work is involved, how the installation will affect finished spaces and what post-mitigation test and warranty documentation will be provided. Retesting is how the parties confirm the system's performance.
5. Sellers should organize prior results and system records
NJDEP's real-estate guidance states that a seller must provide a prospective buyer with prior radon test results and evidence of mitigation or treatment when the contract of sale is entered. Gather those records before listing if possible. Include the complete reports, installation documents, post-mitigation results, service information and any subsequent test results rather than offering only a verbal summary.
A mitigation system is part of the property. Identify the fan, system indicator and visible piping, but do not promise that the system works solely because a fan can be heard. A current test and a certified professional's evaluation provide better evidence. Sellers should discuss disclosure and contract questions with their attorney.
6. Ask specific questions about new construction
New homes in New Jersey Tier 1 municipalities must include radon-resistant construction features under the State's Radon Hazard Subcode. NJDEP describes features such as a gas-permeable layer, plastic sheeting, sealed openings, vent piping and an electrical rough-in. Outside Tier 1, a buyer can still ask the builder whether comparable features are included.
A passive vent pipe is not the same as an active mitigation system. NJDEP explains that the rough-in becomes active only when a certified mitigation company installs and activates a fan. Ask the builder which components were installed, where the vent terminates, whether the electrical rough-in is accessible and which documents will be delivered at closing.
Radon-resistant construction does not replace testing. NJDEP advises buyers of newly constructed homes to test after moving in. Put the testing plan, responsibility and any builder commitment in writing with help from the appropriate attorney and construction professionals.
Questions to keep with the property file
- Has the home ever been tested, and can I review every available report?
- Is the measurement business and individual currently certified by NJDEP?
- Which level and room will be tested, and why was that location selected?
- Who is responsible for maintaining and documenting the required conditions?
- If a mitigation system exists, when was it installed and last tested?
- Will the transaction allow time to review the result and obtain a mitigation proposal if needed?
- For new construction, which radon-resistant components were installed and is the system passive or active?
Five-county starting points
Start with NJDEP's statewide testing, certified-business and municipal-potential resources for any property in the five-county service area. County and municipal health departments may also offer education or test kits, but availability can change. Burlington County announced free homeowner kits in March 2026 while supplies lasted; confirm current availability directly rather than assuming a kit remains available.
- Burlington County Environmental Health
- Ocean County Health Department environmental-health services
- Atlantic County Environmental Health
- Camden County environmental-health services
- Gloucester County Environmental Health
Official resources checked November 2, 2026
- NJDEP Radon Program
- NJDEP: testing your home for radon
- NJDEP: radon and real estate, including new construction
- NJDEP municipal radon-potential report
- NJDEP-certified radon business information
- Burlington County: 2026 homeowner test-kit announcement
Scope note: This guide helps organize questions; it is not medical, engineering, legal or environmental advice. Use NJDEP-certified radon professionals for testing and mitigation, and consult your attorney about disclosure and contract obligations.